FOBRO MOBIL D49

1. Gateway ftting – guiding the
agricultural machinery with GPS;
2. The technology of variable norms;
3. Mapping of yield;
4. Remote detection;
5. Geo-information system
(processing and data analysis).

FOBRO D92 front

Product details

  1. Engine: 4-cylinder Kubota 49 HP

  2. Traction drive: hydrostatic

  3. Length: 3,200 mm

  4. Width: 1,770 mm

  5. Wheelbase: 2,250 mm

  6. Centre space for attachments: 1,400 mm

  7. Track width: 1,500 – 1,800 mm
    or 1’800 – 2’100 mm

  8. Tare weight/permissible laden weight:
    1,300 kg /2,100 kg

  9. Tyres: 6.00 – 16/ 8.3-24 AS

Fobro d49 cabin

Standard equpment

  • Overhead safety frame

  • Choice of track widths (150, 160, 170 and 180 cm)

  • Multi-function joystick with speed control

  • Continuously variable hydraulic drive from

  • 0.2 to 20 km/h on 3 acceleration curves

  • Easy turning management (fixed)

  • Power steering

  • Deutz 3-cylinder diesel engine 46 HP oil/air cooled

  • Pre-prepared front and rear hydraulics

  • Diesel and fuel tank each with 50 ltr capacity, with sight glass

  • Built-in toolbox

  • Hydraulic oil cooler

  • Differential lock

  • Hydraulics with three-point mounting in the space between the axles, cat. I+II with mech.

  • Upper link 800 kg

  • Acoustic insulation on the engine bonnet

  • Rear tyres 8.3-24 AS, front tyres 6.0.16, 0.2 up to 20 km/h

  • 1x double-acting hydraulic connection in the space between the axles

  • 1x double-acting hydraulic engine connection at the front

  • Electric switch and connection socket for 12 V front and rear, switched in parallel (for a motorised drive, e.g. manure spreader)

  • Ground clearance: 65 cm (other values on request)

  • NEW: With cab and optionally with AIR CONDITIONING, HEATING and SEALED AGAINST INGRESS OF CHEMICALS

Fobro d49 from behind
Fobro d49 from behind

FOBRO MOBIL D92

The innovative overhead frame concept combines on the one hand a truly free view of the cultivation equipment. Thanks to the ingenious 3-point attachment system, existing equipment which today is pulled by tractors can mostly be attached without expensive modifications.

FOBRO D92 front

Product details

  1. Engine: 4-cylinder Deutz 68 kW / 92 HP

  2. Traction drive: hydrostatic

  3. Length: 4,900 mm

  4. Width: 1,840 mm

  5. Wheelbase: 3,150 mm

  6. Centre space for attachments: 1,600 mm

  7. Track width:1,500 – 1,800 mm
    or 1’800 – 2’100 mm

  8. Tare weight/permissible laden weight:
    3,900 kg / 6,500 kg

  9. Tyres: 9.5-R24/270-95-R44AS

Fobro d92 cabin

Standard equpment

  • Overhead safety frame

  • Adjustable track width (150 to 180 mm)

  • Multi-function joystick with speed control

  • Continuously variable hydraulic drive from 0.2 to 30 km/h

  • Turn management

  • Power steering

  • Pre-prepared front and rear hydraulics

  • Diesel and fuel tank each with 50 ltr capacity

  • Hydraulics with three-point mounting in the space between the axles

  • cat. I+II with upper link 1500 kg

  • Acoustic insulation on the engine bonnet

  • Rear tyres 270/95 R44, front tyres 11.5/80-15,3 R14 AS

  • 1x double-acting hydraulic connection in the space between the axles

  • 1x double-acting oil engine connection at the front

  • 2x double-acting hydraulic connection at the rear

  • Electric switch from front and rear power sockets 12V (for a motorised drive, e.g. manure spreader)

  • Diesel fuel tank with 70 ltr. Capacity

  • Hydraulic reservoir with 125 ltr. Capacity (fan)

  • Ground clearance: 70 cm (fixed choice to 120 cm, hydraulic to 140 cm)

Fobro d92 joystick
Fobro d92 in the field

FOBRO MOBIL D26

The innovative overhead frame concept combines on the one hand a truly free view of the cultivation equipment. Thanks to the ingenious 3-point attachment system, existing equipment which today is pulled by tractors can mostly be attached

Product details

  • Tare weight of the basic vehicle from 800 kg 26 HP 3-cylinder, of which max 16 HP is available to the rear axle drive motor and max 18 HP to the auxiliary hydraulics in the space between the axles and/or rear hydraulics for mulcher, rotary earthing-up equipment, drills or chopping brush (other double-acting drives only for lifting/lowering)

  • Front: Fixed bracket for sprays or RDS max 300 litres

  • Hydraulics in the space between the axles: 600 kg, floating position or double-acting, with manual stop (hydraulic clips)

  • Rear hydraulics 400 kg, floating position or double-acting, with manual stop (hydraulic clips) min. 400 m/h up to 20 km/h (high starting torque on a 40° incline)

  • Wheels somewhat larger (somewhat similar to the drive wheels of a maize drill)

  • Rear OK

  • Use on public roads

  • Lighting for use on public roads and working spotlights front and rear

  • Slope control switch under the right foot (rocker to the left means accelerate the left, rocker to the right means accelerate the right, no pressure default is neutral)

  • Power steering (pre-prepared Orbitrol GPS steering) 2x direct-acting front (1x foot switch and 1x manual valve) 1x direct-acting rear (foot switch)

  • Roof tarpaulin

Let's Get In Touch!

Give us a call or send us an email and we will get back to you as soon as possible!

HEADQUATERS

Bernstrasse 26, CH-6152 Hüswil
(Service, Ersatzteile, Verkauf CH)